Yes. BLUEAIR, makers of BLUEAIR DustMagnet 5410i Air Purifier for large room, says it does. And my research into customer satisfaction concerning Blueair air purifiers ability to remove mold spores confirms this.
Mold is an issue that might arise in damp areas since it can grow there. Mold allergies and asthma may sometimes induce symptoms that are quite similar. Even if you do not have an allergy to mold, breathing in mold spores that are floating about in the air may cause irritation to your eyes, skin, nose, throat, and lungs.
How does the BLUEAIR DustMagnet 5410i air purifier remove mold spores ?
It captures 99% of the dust before it settles. Dual air intake and vortex circulation keep airborne dust particles including mold spores moving, while electrostatic charges cause them to cluster together. Once entering, dust particles are drawn to the charged stainless steel pre-filters like magnets and attach themselves there.
This BLUEAIR DustMagnet 5410i Air Purifier for large room eliminates 99.99% of common allergens. Contributes to the reduction of allergens and pollutants that are the primary causes of allergy and asthma symptoms
Removes odor and particles down to 0.1 micron. Perfect for elimination of mold spore, smoke and haze during the season of wildfires; The carbon filter captures minor home aromas caused by smoking, pets, and cooking, while the HEPA filter removes 99.97% of airborne particles such as smoke, dust, viruses, and pet hair. Mold spores are microscopic in size (2 – 100 microns [µm] in diameter). Many spores are so small they easily float through the air and can be carried for great distances by even the gentlest breezes. Hence you need the best filtration system to trap them. The number of mold spores suspended in indoor and outdoor air fluctuates from season to season, day to day and even hour to hour.
When looking for a Blueair air purifier cleaner to help decrease mold spores and allergies at home, it is important to consider the filtration process and particle size (and percentage). During allergy season, it’s especially important to invest in a high-quality air filter that can trap and eliminate even the tiniest airborne particles and allergens from your home’s air.
Some other cool features of this Blueair air purifier for mold spores.
- The HEPASilent dual filtration system from Blueair cleans the air up to 45% quicker and with up to 67% less noise than typical HEPA filtration alone; On high, it can quickly clean a big room measuring 357 square feet in around 12.5 minutes or an XL area of 1,713 square feet in approximately 60 minutes.
- Using the in-app real-time monitoring, you may enable auto-adjustments to ensure that the air conditions are always ideal; You will always be aware of the air quality thanks to the 5-color LED and in-app monitoring.
- ENERGY STAR certified for low energy consumption, this fan can clear the air in a room more effectively while consuming as little as 7 watts on the lowest speed setting and as much as a light bulb’s worth of power (42 watts) on the maximum level.
Problems with Mold spores and other air pollutants.
Molds release their children into the air, which are referred to as spores. Because of their minute size, these spores are invisible to the naked sight of a human being. Mold growth may start to develop inside of a building if mold spores land on moist surfaces. If there isn’t any moisture around, then there won’t be a good environment for any of the many varieties of mold to grow.
Formaldehyde on the other hand, is a gas that is odorless, invisible, and combustible at room temperature. It also has a very pungent stench. Formaldehyde may have a negative impact on one’s health if they are exposed to it.
Resins used in the production of hardwood plywood, particleboard, and medium-density fiberboard all include traces of formaldehyde.
Additionally found in products for the home such as glues, permanent press textiles, paints and coatings, lacquers and finishes, and paper products; preservatives found in particular pharmaceuticals, cosmetics, and consumer products such as dishwashing detergents and fabric softeners; and fertilizers and pesticides.
In addition to that, it may be present in cigarette smoke and unventilated fuel-burning appliances like gas stoves and kerosene heaters.
How mold can enter your home.
Mold has the capacity to infiltrate a structure via any openings, including doors, windows, vents, and equipment associated with HVAC systems. Mold spores that are suspended in the air outside have the potential to settle on the clothes or hair of a person or pet, and they may then be brought inside. Mold is able to flourish in damp surroundings, such as those that are left behind after floods or locations where water has poured through the roof, pipes, walls, or plant pots.
Mold may also grow in situations that have been exposed to high levels of humidity. Mold may grow on a wide variety of construction materials because these components provide the nutrients that are necessary for mold to flourish. Mold can grow on almost everything.
Wet cellulose materials are especially conducive to the formation of a broad range of molds. These materials include paper and paper products, cardboard, ceiling tiles, wood, and wood products. Mold may thrive on a broad range of substrates, including dust, paints, wallpaper, insulating materials, drywall, carpet, fabric, and upholstery, to name a few examples.
How to get rid of mold completely.
Despite your best efforts, mold spores may still be present in the air and on the flooring of your home. Mold spores are unable to reproduce if there is a lack of moisture. Keeping the moisture level in the home under control will help avoid mold growth. Find the source of the moisture and remove the mold to stop further development of mold. Mold will very certainly start growing again if the water problem is not resolved.
If you already have a mold issue, you should take action as soon as possible. Consider the negative effects mold has on one’s health in addition to the destruction it does to the surface it grows on.
The longer it stays unchecked, the more harm it will eventually do.
When determining who should be in charge of the cleaning, there are a number of different factors that need to be taken into consideration. Considerable thought should be given to the magnitude of the mold problem. If the mess isn’t too big, you should be able to handle cleaning it all by yourself.
If you are using a professional, make sure the contractor you pick has previous expertise with mold remediation if you decide to have someone else do the cleanup for you. Make sure they are conversant with all the necessary guidelines and processes and standards for removing mold .
It is important to consider inspecting the heating, ventilation, and air conditioning (HVAC) systems in a building because these systems have the potential to be contaminated with mold. For instance, they could be contributing to an existing moisture problem, or there could be mold growing at the point where air enters the system. In the event that it is moldy, it has the ability to spread throughout the whole building.
If the water damage and/or mold damage was caused by sewage or any other kind of contaminated water, then you should get in touch with a specialist who has experience cleaning and repairing structures that have been damaged by contaminated water. This professional will have the knowledge and tools necessary to clean and repair the damage caused by contaminated water.
Before beginning the cleaning procedure, you should see a doctor or another appropriately trained specialist if you have any concerns about your health.
Author: Saleh Ibrahim